You're tired of sanding, staining and replacing boards every few summers, and Riverside sun is hard on wood. A Trex composite deck solves that — a low-maintenance surface that holds its color, resists splintering, and gives you a real outdoor room instead of a chore list. New Generation Construction, owned and run by Ely Ramos here in Riverside, builds Trex decks from the footings up. We work one-on-one with homeowners, use premium materials from manufacturers who stand behind their products, and finish what we start. CSLB License 910999.
What Trex decking installation involves
A composite deck is only as good as what's underneath it. Most of the work you'll never see: laying out the deck, digging and pouring footings to code, setting posts and beams, and framing joists at the spacing the manufacturer specifies — Trex boards need proper support, and undersized or over-spaced framing is where cheap decks fail first. On attached decks we flash the ledger correctly so water never gets behind your siding or stucco.
From there the boards go down with hidden fasteners so the surface stays clean and screw-free. We handle picture framing, mitered corners, breaker boards on longer runs, and fascia to close in the frame. Railing gets set plumb and solid — composite, aluminum or cable, depending on the look you're after and what your elevation requires. Stairs are framed with consistent riser heights and treads finished to match the deck.
A typical Riverside job runs a few days to a couple of weeks depending on square footage, height off grade, and whether stairs and railing are involved. We coordinate inspections, keep the site clean, and walk the finished deck with you before we call it done.
Why New Generation Construction for Trex decking installation
- Licensed contractor, CSLB 910999. A real license number you can look up, on every project in Riverside.
- Premium materials, no substitutions. We buy from reputable manufacturers and vendors whose products carry strong warranties — we don't downgrade the deck boards, fasteners or framing hardware to shave a bid.
- Structure done right. Code footings, correct joist spacing for composite, properly flashed ledgers and hidden fastener systems installed the way the manufacturer specifies.
- You deal with the owner. Ely Ramos is on the project and reachable — one-on-one, start to finish, not through a call center.
- Weekend access. The office is Monday through Friday, 8 to 5, but project managers are available by phone on weekends.
- We build the whole backyard. Decks tie into pavers, hardscape, patio covers and pergolas — one contractor, one plan, no finger-pointing between trades.
Our Trex decking installation process
- Phone call. Tell us what you're picturing — size, location, whether it's ground-level or elevated, and how you want to use the space.
- On-site walkthrough. We measure, check grade and drainage, look at the house connection point, and talk through Trex board lines, colors and railing options in front of your actual house.
- Written proposal. A clear scope with materials named — deck line, board color, fastener system, framing, railing, stairs — so you can compare it honestly against any other bid.
- Permits and scheduling. We pull what the project requires with the City of Riverside or County of Riverside and set a realistic start date.
- Demo and layout. Old deck or slab comes out, the area is cleared, and footings are laid out and poured.
- Framing and inspection. Posts, beams, ledger and joists go in, then framing inspection before anything covers it.
- Decking, railing and finish. Boards, hidden fasteners, fascia, stairs and railing installed; site cleaned; final walkthrough with you.
What Trex decking installation typically costs
We won't pretend there's one number. Estimates range based on square footage, how high the deck sits off the ground, soil and footing requirements, the Trex product line you choose, how much railing and how many stair runs are involved, and whether an existing deck or slab has to come out first. Elevated decks cost more than ground-level because of posts, beams, bracing and railing. Curves, picture framing, inlays and multi-level layouts add labor.
Our proposals include design consultation, permits where required, framing, decking, hidden fasteners, fascia, railing, stairs and cleanup. Things like electrical, lighting, patio covers or surrounding hardscape are quoted separately so you can see what each piece costs.
You'll find lower bids in Riverside. What usually differs is framing quality, fastener systems, warranty-backed materials, licensing and whether the contractor is still around in five years. Call us for a free, itemized quote and compare line by line.
Service areas we cover
- Riverside
- Moreno Valley
- Corona
- Jurupa Valley
- Norco
- Eastvale
- Redlands
- Rancho Cucamonga
- Temecula
- Menifee
FAQ
How long does a Trex deck last in Riverside heat?
Composite decking is built for exactly this climate — it won't splinter, rot or need annual staining, and the Trex lines we install carry manufacturer warranties against fading and staining. Ask us for the specific warranty terms on the product line you pick.
Can you build a Trex deck over my existing concrete patio?
Often yes, using a sleeper frame — provided the slab drains properly and there's enough height at the door threshold. We check both during the walkthrough.
Do I need a permit for a deck in Riverside?
It depends on height, size and whether it's attached to the house. We'll tell you straight during the estimate and handle the permitting when it's required.
Is Trex hot to walk on barefoot?
Composite gets warm in direct Inland Empire sun like any decking. Lighter board colors run cooler, and pairing the deck with a patio cover or pergola makes a big difference — we build those too.
How much maintenance does composite decking need?
Soap, water and a soft brush a couple times a year. No sanding, no sealing, no re-staining.
Can you combine the deck with pavers or landscaping?
Yes. We do decks, hardscape, landscape, fireplaces and BBQ islands, so the whole backyard gets designed and built as one project.
Ready to stop maintaining a wood deck and start using your backyard? Call New Generation Construction at +17142968788 for a free on-site estimate on Trex decking installation in Riverside. Talk directly with Ely and his team, get an itemized proposal with the materials named, and see what a properly built composite deck actually costs. Office hours are Monday through Friday, 8 am to 5 pm — project managers are reachable by phone on weekends. CSLB License 910999.